PRO-CHOPPER : FACTS

Description of Machine Operation
The Pro-Chopper is designed to chop and blow a bale of hay or straw to be used as mulch on a freshly prepared seedbed.

The machine can sow grass seed at the same time you are applying the mulch. The Pro-Chopper is a dry application machine.

Time Table
The Pro-Chopper will chop and blow a bale in less than a minute.

The Pro-Chopper is shipped with approximately 15 minutes of assembly. (There are instructions included for assembly with every machine.)

Machine Support
Each Pro-Chopper is shipped with an owner's manual for the machine itself and also for the engine.

Each Pro-Chopper comes with an Operators Instruction Video that covers the Operation, Safety Features, and Maintenance Procedures of the machine.

Weights
The Pro-Chopper weighs 520 pounds and has carrying handles on each end that will allow 4 people to load the machine by hand and 1" square tubing on each side for lifting with a set of forks.

The shipping weight of the Pro-Chopper is 600 pounds. (You will need a forklift to unload the machine.)

Hose
The Pro-Chopper is shipped with 33 feet of hose and the material will blow 10 to 15 feet past the end of the hose. (Some owners have used 50 to 60 foot sections of hose on their machines with good success, as long as they keep the hose fairly straight. This is done to reach the bottom of an embankment.)

Strings
You can place the bail in "twine and all" as long as you have the regular hemp twine. Once the machine cuts the twine, it is recommended that you pull it back out, so it doesn't wrap around the cutter shaft. If you have plastic twine or wire, it is necessary to cut the bale open on the floor of the vehicle and then fill the tub full with the bale to be chopped.

History/Location
Pro-Choppers are in 47 states, Canada and Australia

Pro-Choppers have been manufactured by Pro Series Products since 1986.

Parts
All replacement parts can be ordered from the factory.

Dimensions
The Pro-Chopper measures 31 1/2" x 48" x 54" tall. The tub measures 27 1/2" across the diameter and 17 inches between the internal flanges. (The flanges are what rotate the bale.)

Pro Series Products has the equipment to help you protect the environment. Gain credibility as a construction firm concerned about the environmental impact of your job site, and enjoy the financial rewards when your green lot is sold.

Contact us with any questions you might have, and ask for our free informational video (VHS) that shows the features and operation of the machine. And, don't forget to ask how the Pro-Chopper and Pro-Crimper go hand-in-hand to help you save time and money!

Click here to download and print the facts and specifications for the Pro-Chopper>>

Pro Series Products
208 N. Armstrong Street . Crothersville, Indiana 47229
Toll Free: (800) 365-2467 . Email: sales@ProSeriesProducts.com